Home

Nsx 6.4.6 release notes

FortiOS Release Notes FortiGate / FortiOS 6

  1. Note: NSX for vSphere 6.4.6 and above versions support direct upgrade to 6.4.10. Note : The End of General Support (EoGS) for NSX Data Center for vSphere is January 16, 2022 and technical guidance ends on January 16, 2023
  2. Issue 2595144: In NSX 6.4.6, Quad Large Edge memory utilization exceeds 90% when active interface count is 6 or above. This issue is observed in NSX 6.4.6 and later due to the change introduced for Rx ring buffer size to 4096 on Quad Large edges. NSX Edge reports high memory utilization when the interface count is 6 or above
  3. If you upgrade from NSX 6.3.2 or earlier to NSX 6.3.3 or later, the NSX VIB names change. The esx-vxlan and esx-vsip VIBs are replaced with esx-nsxv if you have NSX 6.3.3 or later installed on ESXi 6.0 or later

The following models are released on a special branch of FortiOS 6.4.6. To confirm that you are running the correct build, run the CLI command get system status and check that the Branch point field shows 1879. FG-200F. is released on build 5785. FG-201F. is released on build 5785. FG-1800F. is released on build 5868. FG-1801F Visit the NSX 6.0 Documentation Center to learn more about the product. VMware NSX for vSphere 6.0.x. Release Notes. NSX for vSphere 6.0.7. Released 04 OCT 2014 | Build 2176282. NSX for vSphere 6.0.6. Released 11 SEP 2014 | Build 2103699. NSX for vSphere 6.0.5. Released 01 JUL 2014 | Build 1911278 After upgrading NSX from version 6.0 to 6.0.x, NSX Edges are not listed on the UI When you upgrade from NSX 6.0 to NSX 6.0.x, the vSphere Web Client plug-in may not upgrade correctly. This may result in UI display issues such as missing NSX Edges The workaround is to manage the option from the CLI. 697667. When the FortiGate is managed by FortiManager, an administrator that selects Login Read-Only is incorrectly allowed to select Update firmware in System > Firmware, browse for an image, and install it. 701742 VMware NSX-T Data Center 2.4 Release Notes Ebrahim Aldesouky ( ITSaurus ) 2:47 pm on August 3, 2018 VMware NSX Multi-site Solutions and Cross-vCenter NSX Desig

The following models are released on a special branch of FortiOS 6.4.5. To confirm that you are running the correct build, run the CLI command get system status and check that the Branch point field shows 1828. FG-80F. is released on build 5656. FG-80F-BP. is released on build 5656. FG-81F. is released on build 5656. FG-100F FortiAnalyzer 6.4.6 Release. FortiAnalyzer. 6.4.6. Release. This document provides information about FortiAnalyzer version 6.4.6 build 2363. The recommended minimum screen resolution for the FortiAnalyzer GUI is 1920 x 1080. Please adjust the screen resolution accordingly. Otherwise, the GUI may not display properly Name Release Build Release Notes Download; VMware NSX for vSphere 6.4.8: 2020-08-10: 16724220: Release Notes: Download: VMware NSX for vSphere 6.4.7: 2020-07-0 VMware NSX-V 6.4.8 Released. Allan Kjaer August 11, 2020. August 11, 2020. VMware has released NSX Data Center for vSphere 6.4.8 and removed version 6.4.7 because of a serious bug. So if you have already deployed 6.4.7, it a good idea to upgrade if you need to change firewall rules. Resolved issue

VMware NSX for vSphere Documentatio

VMware NSX for vSphere 6

  1. All versions in 6.4.3, 6.4.4 and 6.4.5 are now able to upgrade to 6.4.6. Once you update to 6.4.6, you can ONLY update to 7.0.1 update 2 and later. This release includes all changes from releases up to and including these update releases: 6.3.13, 6.4.3 Update 12 6.4.4 and 6.4.5
  2. Another NSX v6.3.5 to v6.4.6 upgrade question Hi. We are in a cross-vCenter setup. After we do our Primary/Secondary managers and the Controller Cluster we had planned to stop and then start our host cluster upgrades the next day. VMware NSX Data Center for vSphere 6.4.6 Release Notes. Upgrade Host Clusters. ARomeo. Blog: https://www.
  3. Read these Release Notes in their entirety before installing the product. 1. Overview. Red Hat JBoss Enterprise Application Platform 6 (JBoss EAP 6) is Red Hat's response to significant changes in the way organizations develop and deploy enterprise applications. As organizations seek to lower operational costs and reduce time to market for new.

Overview. This article describes the Release Notes for ExOS 6.4.6. Information. These are essential things to keep in mind regarding ExOS 6.4.6: If you use Differentiated Services Code Point (DSCP) values for filtering, refer to bug ID D-03627 in the Bug fixes and Minor Improvements section below for an important message.; All versions in 6.4.3, 6.4.4, and 6.4.5 are now able to upgrade to 6.4.6 AEM 6.4.6.0. AEM 6.4.6.0 is an important update that includes performance, stability, security and key customer fixes and enhancements released since the general availability of AEM 6.4 in April 2018. It is also cumulative which means that 6.4.6.0 includes all AEM 6.4 service packs release before it. Some of the key highlights of AEM 6.4.6.0 are 6.4.6. Release. This document provides information about FortiManager version 6.4.6 build 2363. The recommended minimum screen resolution for the FortiManager GUI is 1920 x 1080. Please adjust the screen resolution accordingly. Otherwise, the GUI may not display properly. This section includes the following topics

  1. imum screen resolution for the FortiAnalyzer GUI is 1920 x 1080
  2. Release Notes - 6.4.5 5/14/2020 - Bug Fixes for Release 6.4.5 Account Management. Modified the column name from 90 Days of Inactivity to 60 Days of Inactivity in the MS Excel Spreadsheet downloaded from the User Security List
  3. 6.4.6 Release Notes. by Josue Salazar | Jun 27, 2019 | Software Release Notes | 2 comments. LinkedIn. Twitter. BPM 3000/4000 Series Autohandler. Released 4900 optional field upgrades for enhanced reliability and ease of use. Implemented the ability to adjust the inspection height for Scanner Tech 3D systems. If the default device measurements.
  4. FortiOS 6.4.6 Release Notes 9 Fortinet Technologies Inc. Special notices Azure-On-Demand image Bug ID Description 657690 Starting from FortiOS 6.4.3, the FG-VM64-AZUREONDEMAND image is no longer provided. Both Azure PAYG and Azure BYOL models will share the same FG-VM64-AZURE image for upgrading and new deployments. Remember to back up your.

After upgrading NSX from version 6.0 to 6.0.x or 6.1, NSX Edges are not listed on the UI When you upgrade from NSX 6.0 to NSX 6.0.x or 6.1, the vSphere Web Client plug-in may not upgrade correctly. This may result in UI display issues such as missing NSX Edges. This issue is not seen if you are upgrading from NSX 6.0.1 or later Release Notes - VectorCAST: 6.4.6 VectorCAST/C,C++, Ada (Core) 81243: Crash while closing windows Previously, VectorCAST experienced a crash when the user closed a window that resulted in a process that closed other windows that were already pending to be closed. This problem . has been fixed in VectorCAST. version 6.4.6 and VectorCAST version.

NSX ITSauru

  1. Release Notes for Tally.Server 9 Release 6.4.6 While opening Tally.Server 9, the message No Tally.Server 9 is running appeared. This issue is resolved
  2. When the upgrade is completed successfully to 6.4.6 or 6.4.8, you can upload NSX-V 6.4.10 bundle and follow the standard upgrade procedure (that includes an upgrade for all components as per the upgrade guide). Related Products and Versions. VMware NSX for vSphere; Languages. English
  3. g in Control Center when using variable playback speed Other
  4. Sailfish 7.6 & 4.6 Release Notes. Sailfish 7.6 for Replicator 1, 2, & 2X. Sailfish 4.6 for Thing-o-Matics & Cupcakes. ReplicatorG 40r23 - Sailfish. As per the Sailfish Installation Guide, the Sailfish firmware may be obtained using ReplicatorG and pointing the download URL at. The download URL is set via the Advanced section of RepG's.
  5. ChartMaker®2018.2 (fv6.4.6) Last Updated: 05/08/2020 Page 1 ChartMaker® Clinical Release Notes ChartMaker® 2018.2 (fv6.4.6) Important Notifications • Upgrade from Microsoft Server 2008 and Windows 7 - In January 2020, your Windows 7 workstations and Microsoft 2008 Servers will no longer be supported. Even with security patches, problems may still arise if yo

This document describes how to upgrade FortiAnalyzer to 6.4.6. This guide is intended to supplement the FortiAnalyzer Release Notes, and it includes the following sections: Firmware best practice: Stay current on patch releases for your current major release. Only upgrade to a new major release or version when you are looking for specific. Tally.Server 9 Release Notes. This page has the Tally.Server 9 release notes from Release 4.5 to Release 6.4.6. Release 6.4.6. While opening Tally.Server 9, the message No Tally.Server 9 is running appeared. This issue is resolved 1/1/2021 UPDATE: Duplicate rule and object detection has been disabled in the 3.6 maintenance releases due to performance issues in environments with 1,000+ rules and/or 3,000 objects. This feature will be re-enabled in the 4.0 release. Object Analyzer. Duplicate object detection based upon exact definition and effective membership for NSX-v, NSX-T and VMCoAWS VMware NSX brings business agility to existing hardware investments NSX is a mature software solution available today This article provides technical guidance for deploying NSX with Cisco UCS and Cisco Nexus 7000 DESIGN GUIDE / Home FortiManager 6.4.6 Release Notes. Release Notes FortiManager 6.4.6 Release This section highlights some of the operational changes that administrators should be aware of in 6.4.6. ADOM version enforcement. Starting in FortiManager 6.4.6, ADOM versions are enforced. ADOM version N and N+1 are allowed, and the enforcement affects policy.

Release Notes FortiAnalyzer 6

Cisco Firepower Release Notes, Version 6.6.1, 6.6.3, and 6.6.4 . Chapter Title. Features and Functionality. PDF - Complete Book (2.47 MB) PDF - This Chapter (0.99 MB) View with Adobe Reader on a variety of devices. ePub - Complete Book (805.0 KB) View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone. About this page. This is an in-progress scratch-pad of notes to build release notes from as and when we release. Please do not list features that are to be shipped already in the 6.3 release!Please do not add wish-list features that you hope will be implemented, but only what actually is implemented already.. What does a good feature look like here Home FortiManager 6.4.6 Release Notes. Release Notes FortiManager 6.4.6 Release Supported models FortiManager VM subscription license (MEA) in FortiManager 6.4.6. FortiManager uses port TCP/4443 to connect to the Fortinet registry and download MEAs. Ensure that the port is also open on any upstream FortiGates Installation of NSX Manager 6.4.1. NSX manager is offered by VMware as an OVA package which can be easily imported into your vSphere environment. The following procedure should be followed to perform this installation: Download NSX manager OVA file from VMware downloads site

Issued: 2020-10-27. OpenShift Container Platform release 4.6 is now available. The list of bug fixes that are included in the update is documented in the RHBA-2020:4196 advisory. The RPM packages that are included in the update are provided by the RHBA-2020:4197 advisory First Published: 2017-05-02 Last Updated: 2017-08-02. This document describes the features, limitations, and bugs for Cisco WAN Automation Engine (Cisco WAE) Release 6.4.6 What's included in AEM 6.4.8.4. AEM Cumulative Fix Pack 6.4.8.4 is an important update that includes several internal and customer fixes since the general availability of AEM 6.4 Service Pack 8 (6.4.8.0) in March 2020 Release Notes FortiManager 6.4.6 Release Supported models FortiManager VM subscription license Management extension applications Special Notices Upgrade Information Downgrading to previous firmware versions Firmware image checksums. The Release Notes provide high-level coverage of the improvements and additions that have been implemented in Red Hat Enterprise Linux 6.4. For detailed documentation on all changes to Red Hat Enterprise Linux for the 6.4 update, refer to the Technical Notes

More details on AEM Forms release notes page. Also, see the Summary of new features and enhancements in AEM 6.4 Forms for information about new and improved features and documentation resources. Experience Manager Livefyre. You can integrate Livefyre with your AEM 6.4 instance. Information on how to integrate Livefyre with AEM is located here In This Section. Release Notes - 6.4.4. Release Notes - 6.4.3. Release Notes - 6.4.2. Release Notes - 6.4.1. Release Notes - 6.4.5. Release Notes - 6.4.6

Release Notes - 6.4.1 6/26/2019 - Bug Fixes for Release 6.4.1. New Decision Support Number. The new National Fire Decision Support Center (NFDSC) number is 208-387-5253 Firefox 3.6 Release Notes. v.3.6.4, released June 22nd, 2010 Check out what's new, the known issues and frequently asked questions about the latest version of Firefox. As always, you're encouraged to tell us what you think, either using this feedback form or by filing a bug in Bugzilla Book Title. Cisco Firepower Release Notes, Version 6.6.1, 6.6.3, and 6.6.4 . Chapter Title. Compatibility. PDF - Complete Book (2.47 MB) PDF - This Chapter (1.03 MB) View with Adobe Reader on a variety of device Change History repeats the list of user-visible modifications for this release and includes similar lists for earlier releases. The release described in the documentation set is 6.4.6. Release 6.4.6. Release 6.4.6 is a maintenance release with code fixes and enhancements. Database internal format unchanged from version 6.4.5 (last change 6.4.0 Release Summary This is a service release of Avigilon Control Center™ 6.6. It adds support for the Avigilon H4 IR PTZ camera and Avigilon H4 Thermal camera. Any users who experience symptoms described within the fixed issues list should install this service release. Each service release improve

VMware NSX-V Release Build Numbers virten

This issue is resolved in NSX 6.4.6. Issue 2337437 is documented in the NSX for vSphere 6.4.6 release notes:. Release Notes for Tally.ERP 9 Release 6.6.3 Always upgrade to the latest release of Tally.ERP 9 to enjoy greater business benefits. Move to the latest release using the easy in-product update facility. Highlights Tally Reports in Browser : A simplified onboarding experience for browser reports, which includes: o Ability to connect company for browser even without enabling security control Release notes for WindowsFollow. Release notes for Windows. There are two download types: Manual: Ad-hoc download with minor enhancements and/or minor bug fixes. Download from the Download Center or when instructed by our Support team. Prompted: Important download with useful feature enhancements and/or critical bug fixes

Red Hat OpenShift Container Storage 4.6 4.6 Release Notes 4. For more information, see Replacing failed storage devices on VMware and bare metal infrastructures using user interface. Volume snapshot Developers and administrators can now take a volume snapshot which is the state of the storage volum NSX-T Data Center 3.1 Release Notes. NSX-T Data Center 3.1 provides a variety of new features to offer new functionalities for virtualized networking and security for private, public, and multi-clouds. Highlights include new features and enhancements in the following focus areas: Cloud-scale Networking : Federation enhancements, Enhanced. Evoq 9.6.4 Release Notes Tony Lee April 29, 2021 01:04. Follow. Overview. This release note details the product updates in Evoq 9.6.4. Information. Evoq 9.6.4 was released on 2020, Oct 19th. DNN Platform 9.6.1. Evoq 9.6.4 is based on DNN Platform 9.6.1. Please find the. Beta release: 19 Jun 2020 Final release: 28 Aug 2020 New Features ASCII precipitation-frequency grid. A new precipitation-frequency parameter grid type was added to support the new precipitation-frequency grid option in the hypothetical storm.The program's grid management framework was generalized to support alternative file formats to the traditional HEC-DSS format

VMware NSX-V 6.4.8 Released Virtual Alla

Upgrade from 6.4.6 / 6.4.7 to 7.4.7, and reboot. The upgrade from 6.4.3 may take longer than normal due to the database upgrade that takes place. v7.x will only accelerate with peers running 6.4.3 and later due to a change to the Exinda internal protocols. If you are installing v7.x into an x800 estate, the best approach is to upgrade your core. Upgrade from 6.4.6 / 6.4.7 to 7.4.10, and reboot. The upgrade from 6.4.3 may take longer than normal due to the database upgrade that takes place. v7.x will only accelerate with peers running 6.4.3 and later due to a change to the Exinda internal protocols. If you are installing v7.x into an x800 estate, the best approach is to upgrade your. v 5.4.5 released 02/3/2017 download. Fixed. Sharepoint connector fixes including authentication and deletion. Amazon Cloud Drive authentication on Mac has been updated due to a change in Amazon's OAuth flow. fixed an issue with refreshing folders with non-ascii characters on Mac that could cause Finder to return the view to the root For more information, see vRealize Automation 8.2 Release Notes. Static IP Pool for NSX-T TEPs: VMware Cloud Foundation 4.2 introduces additional flexibility to leverage static IP pools for NSX-T Host Overlay (TEP) networks as an alternative to DHCP. This applies to the management domain and VI workload domains with uniform L2 clusters Click on Create Virtual Service > Basic Setup. Select the NSX-T cloud cloud and click on Next. Configure the virtual service. Under Add Servers, click on Security Groups and select the NSX Security Group. Note: Starting with Avi Vantage version 20.1.2, the front-end (VIP) IP supports an IPv6 address. Click on Save

Release Date: September 29, 2020. Features. Tanzu Kubernetes Grid Integrated Edition Management Console v1.9.0 updates include: Support for vSphere 7; Support for NSX-T 3.0, including running NSX-T on a virtual distributed switch. Support for Windows worker nodes on NSX-T networking; Configure compute profiles in the management consol CentOS Linux 6.4-6.10 Oracle Linux 6.4-6.10 Red Hat Enterprise Linux (RHEL) 6.4-6.10 SUSE Linux Enterprise Server 11 SP4 and 12 SP3 Ubuntu Linux 16.04 LTS; Hypervisors: Hyper-V on Windows Server 2012 and 2012 R2 (for export) Hyper-V on Windows 10 x64 (for Agentless protection) Oracle Virtual Box 5.2; Platforms: Oracle RDBMS 18c and 12 Oscar 1.6.4 release notes. release. 2018-08-09. This is Oscar 1.6.4, a bugfix release that fixes the setup.py requirements for Oscar to make it compatible with Django 2.1. Next Previous. Build Internal Tools 10x faster with 25+ essential Database & API Integrations Try Retool for free. Sponsored · Ads served ethically The Panorama plugin for VMware NSX 3.2.0 introduces two new features for the VM-Series firewall on VMware NSX-V and NSX-T. For more information, see the Compatibility Matrix and VM-Series Deployment Guides for 9.0, 9.1, or 10.0. What's New in Panorama Plugin for VMware NSX 3.2.0. Upgrading the Panorama Plugin for VMware NSX to 3.2.0

This document (RN-90HDI011-83, March 2019) provides late-breaking information about Hitachi Data Ingestor 6.4.6-02. It includes information that was not available at the time the technical Data Ingestor 6.4.6-02 Release Notes - Hitachi Vantara Knowledg Release Notes for AnyConnect Secure Mobility Client, Release 4.6 These release notes provide information for AnyConnect Secure Mobility on Windows, Mac OS X and Linux platforms. An always-on intelligent VPN helps AnyConnect client devices to automatically select the optimal network access point and adapt its tunneling protocol to the most. Release Notes for Tally.Server 9 Release 6.4.6. While opening Tally.Server 9, the message No Tally.Server 9 is running appeared. This issue is resolved. Mail this article The Smart-UPS and Single-Phase Symmetra application firmware v6.5.6 release notes apply to the following NMC cards: • AP9630 (CH) UPS Network Management Card 2 • AP9631 (CH) UPS Network Management Card 2 • AP9635 (CH) UPS Network Management Card 2 • Single-Phase UPS models with an integrated Network Management Card 2 (e.g

Versiv™ Release Notes for Version 6.6 Build 2 (April 2021) Versiv™ Release Notes for Version 6.6 Build 2 (April 2021) This update covers the DSX‐8000 CableAnalyzer™, DSX‐5000 CableAnalyzer™, DSX‐600 CableAnalyzer™, DSX-602 CableAnalyzer™, CertiFiber Pro®, OptiFiber Pro® modules, FI-1000 FiberInspector™ Pro and FI-3000 FiberInspector™ Ultra Release 6.4.6 Week 33 , Aug 10, 2020 - Aug 16, 2020 6.4.7 release. Only important bug fixes, and l10n improvements Event Date Hard code freeze & branch libreoffice-6-4-7 Week 39 , Sep 21, 2020 - Sep 27, 2020 RC1: Week 39 , Sep 21, 2020 - Sep 27, 2020 RC2 V4 Maintenance and Patch Releases. Important: This page contains Release Notes from V4.0.0.0 release and later. For a consolidated view of Release Notes for all the versions, refer to the Release Notes page. Important: Beginning in V4.3.0.6.0, the on-premises product portfolio of GE Digital APM is also referred to as APM Classic in our. 1. Translations. Translations of these release notes are available for the following languages : Deutsch (de) - Christoph Galuschka Nederlands (nl) - Joshua Thijssen Português do Brasil (pt-br) - Cleber Paiva de Souza 简体中文 (zh-cn) - Timothy Lee 繁體中文 (zh-tw) - Timothy Lee 2 Support for macOS 10.10 and 10.11 is deprecated. Minimum runtime requirement will be raised in a future release. Windows. Windows Default apps button was added to Options LibreOffice General, to call Windows file associations management. This button behaves according to Microsoft file association management policy, which is to open Default.

Version 6.4.6 Release Notes . Minimum System Requirements: Windows . Windows 8.1 . Processor 1.5 GHz 32-bit (x86) QuickTime 7.6.2 or higher . Minimum 2 GB RAM 40 GB HD. Windows 7 . Processor 1.5 GHz 32-bit (x86) QuickTime 7.6.2 or higher . Minimum 2 GB RAM 40 GB HD. Windows 2008 server . Service Pack 2 Processor 1.5 GHz 32-bit (x86 LDM 6.4.6 Release Notes. Changes from LDM 6.4.5. Changes from LDM 6.3. Changes from LDM 6.4.5. Improved error-message from readtcp() in the svc_tcp module when a select() on the socket times-out. Modified ldmadmin(1) script to allow a zero argument to the offset option (-o)

5.4 Release Introduces Accessibility Mode WFDSS Spring 2017 Updates 6.1 Release New Functionality and Enhancements 6.2 Release Functionality and Enhancements 6.3 Release New Functionality and Enhancements 6.4 Release Notes Release Notes - 6.4.4 Release Notes - 6.4.3 Release Notes - 6.4.2 Release Notes - 6.4.1 Release Notes - 6.4.5 Release Notes. May 27, 2021 SDK Releases. The Firebase JavaScript SDK (v8.6.3) is now available. For more details, see the Firebase JavaScript SDK release notes.To install the SDK, see Add Firebase to your JavaScript Project.; May 26, 2021 SDK Releases. The Firebase Admin Node.js SDK (v9.9.0) is now available. This release comes with support for configuring the authorization code flow for OIDC providers and. Foglight for NMS Integration 5.6.4.6 - Release Notes; Foglight for NMS Integration 5.6.4.6 - Release Notes

For information, see Issue 2603550: Some VMs are vMotioned and lose network connectivity during UA nodes upgrade in the VMware NSX-T Data Center 3.1.1 Release Notes. Workaround To avoid the loss of network connectivity during UA node upgrade, ensure DRS is set to manual mode during your upgrade from NSX-T v3.0.2 to v3.1.0 AEM 6.4 user guides. Create, manage, deliver, and optimize digital assets. This guide describes how to create, manage, publish, and update digital forms. Create online experiences such as forums, user groups, learning resources, and other social features. This guide explains the concepts of authoring in AEM VMware Cloud Foundation 4.2 announces the release of one of the most anticipated features for VCF customers: NSX-T Federation. NSX-T Federation capabilities provide a cloud-like operating model for network administrators by simplifying the consumption of networking and security constructs. This includes centralized management, consistent networking and policy configuration with enforcement and.

Below is a summary of key features. Refer individual SDK Components release notes for more details. 4.6.1.2.1. Vision Apps (ADAS, Vision, DL demos). MySQL 5.6.51 is the last release of the MySQL 5.6 series. For additional MySQL 5.6 documentation, see the MySQL 5.6 Reference Manual, which includes an overview of features added in MySQL 5.6 ( What Is New in MySQL 5.6 ), and discussion of upgrade issues that you may encounter for upgrades from MySQL 5.5 to MySQL 5.6 ( Changes in MySQL 5.6 )

Kokua 6.4.6 Release Notes - Kokua - Koku

What's New in WFDSS. This section list recent WFDSS release dates and links to the corresponding release notes and videos where available.. July 7, 2021: Release 6.4.10.5. 6.4.10.5 Release Notes; June 16, 2021: Release 6.4.10. 6.4.10 Release Notes Release notes. Release notes for the official Django releases. Each release note will tell you what's new in each version, and will also describe any backwards-incompatible changes made in that version. For those upgrading to a new version of Django , you will need to check all the backwards-incompatible changes and deprecated features for. A summary of the new features and capabilities can be found below along with useful links to blogs, release notes and updated VCF documentation. SDDC Manager Enhancements: There are numerous enhancements to software lifecycle management within SDDC Manager that will allow admins to skip previous releases and allows NSX-T clusters to be upgraded. Release Notes. We are always improving Xray. Check out the new features and/or fixes in our detailed Release Notes below for the latest versions. In Xray's Atlassian Marketplace page, you will find an exhaustive list of versions along with their respective release notes, from the oldest to the most recent ones The following issues are resolved in VMware Player 4.0.6. Scrolling with a Lenovo ThinkPad UltraNav scroll button no longer requires excessive force. Performance issues for Linux HGFS clients have been fixed. Red Hat Enterprise Linux 6.4 32bit no longer crashes when powering on virtual machines

Deep Security and VMware compatibility matrix - Trend Micr

Confluence release notes provide information on the features and improvements in each release. This page includes release notes for platform releases, feature releases and bug fix releases. If you are upgrading from an earlier version of Confluence, you will find essential information in the upgrade notes associated with the relevant release notes 6.5 Edge 6 Release Notes. We are happy to introduce OnApp 6.5 Edge 6 (6.5.edge6-47). This document lists features, improvements, and fixes implemented for all available OnApp components within the 6.5 Edge 6. OnApp 6.5 Edge 6 is an edge release that is not designed to be installed on production environments Zoom Releases By Date. Release notes for July 3, 2021. Release notes for July 5, 2021. Release notes for July 2, 2021. Release notes for July 1, 2021. Release notes for June 28, 2021. Release notes for June 27, 2021. Release notes for June 25, 2021. Release notes for June 23, 2021 See below for the detailed release notes for the Indeni Automation Platform 6.x.x versions. Need the latest software build? Download Indeni. 6.6-Latest 6.7.16.7.06.6. When you upgrade the Deep Security Virtual Appliance SVM in NSX-T Manager, Deep Security Manager will now detect that a new SVM is now protecting guest VMs, and will auto-activate those VMs after the upgrade. Upgraded the vCloud Connector in Deep Security Manager supports vCloud 9.7 and vCloud 10.0

6.5 Edge 5 Release Notes - Release Note

Xcode 6.0.1 Release Notes Resolved Issues App Submission. App Store submission issues encountered with the Xcode 6.0 GM seed have been resolved. (18444000) Xcode 6.0 Release Notes New Features Swift Language. Swift is a new object-oriented programming language for iOS development. Swift is modern, powerful, expressive, and easy to use Learn about the bugs fixed at this release of ArcGIS Pro.. Issues addressed. The list of issues addressed describes bugs that were reported to Esri Technical Support and are fixed in ArcGIS Pro 2.6.. See a list of all ArcGIS Pro versions, build numbers, and release dates.. Issues addressed at ArcGIS Pro 2.6.6. ArcGIS Pro 2.6.6 fixes the issues listed below and includes the fixes listed under 2. Current version 4.7 Version Release date Release type 4.7.3 July 12, 2021 Preview 4.7.2 June 28, 2021 Preview 4.7.1 April 22, 2021 Preview Disclaimer: The preview version contains new f.. I'll also be upgrading NSX-T again from 3.0 to 3.0.1. When I started this blog article the latest and greatest was not yet available. So I will be doing that upgrade as well. Useful Links. VMware NSX-T Data Center 3.0 Release Notes. NSX-T Product Documentation Homepage. NSX-T Data Center Upgrade Guide (web based, not PDF MongoDB version 4.4.5 is not recommended for production use due to a critical issue, WT-7426.The issue is fixed in version 4.4.6

ExOS 6.4.6 Release Note

Pages in category Release Notes The following 200 pages are in this category, out of 494 total. (previous 200) ( IUCLID 6 Release notes - 6.5.20.0 Page | 6 18.11 Validation assistant.. 6

Another NSX v6.3.5 to v6.4.6 upgrade question - VMware ..

Release Notes for TYPO3 4.7.6. This document contains information about TYPO3 version 4.7.6 which was released on November 8th 2012. News. This release is a combined bug fix and security release. Notes. Due to security issues found in the TYPO3 Core, there was a combined release of TYPO3 4.5.21, 4.6.14 and 4.7.6.\ *The iOS release requires Apple approval and may take a few additional days to appear in the App Store. Notes: We have temporarily disabled the Active Apps Notifier to enhance the user experience of this feature and make improvements. The client release has been delayed until June 8, 2021. New and enhanced features. Meeting/webinar feature After installing VMware NSX plugin 2.0.4, when Panorama and pushes an OVF file to NSX Manager, the Service Manager status on Panorama goes Out of Sync The VMware NSX plugin 2.0.4 automatically adds support for ESXi 6.7 to each of your service definitions

6.4.0 Release Notes Red Hat JBoss Enterprise Application ..

VMware Announced the GA Releases of VMware NSX-T Data Center 3.1.1 See the base table for all the technical enablement links. Product Overview VMware NSX-T Data Center 3.1.1 | Build 17483185 What's New NSX-T Data Center 3.1.1 provides a variety of new features to offer new functionalities for virtualized networking and security for private, public Review Board 1.0 Alpha 2 Release Notes Review Board 1.0 Alpha 1 Release Notes Keep up with the latest Review Board releases, security updates, and helpful information Release Notes for AnyConnect Secure Mobility Client, Release 4.10 AnyConnect Support for Microsoft Windows •WinPcapserviceRemotePacketCaptureProtocolv.0(experimental)distributedwithWireshar MySQL 5.6 Release Notes / Changes in MySQL 5.6.4 (2011-12-20, Milestone 7) Changes in MySQL 5.6.4 (2011-12-20, Milestone 7) Note. This is a milestone release, for use at your own risk. Upgrades between milestone releases (or from a milestone release to a GA release) are not supported. Significant. Release Notes (v 1.6) SharePoint Connector 1.6.4 Release Notes (v 1.6) Created by Almuth Böhme. Aug 19, 2016 . 17th December 2012. Atlassian is proud to present the Confluence SharePoint Connector 1.6.4. This bug-fix release provides a number of stability improvements and minor bug-fixes discovered since the 1.6 release

ExOS 6.4.6 Release Notes - Exinda Suppor

5.14.1 release notes. October 16, 2019 — The latest release of Sensu Go, version 5.14.1, is now available for download. This release adds Prometheus gauges for check schedulers and fixes several bugs, including a bug discovered in 5.14.0 that prevented OIDC authentication providers from properly loading on start-up Current Release July 19, 2021 version 5.7.3(1498) New and enhanced features. Meeting/webinar features. Reintroducing: Active Apps Notifier When an app has real-time access to meeting/webinar content, such as video, audio, and/or chat, the Active Apps Notifier will appear in the same window as the current meeting in the top-left corner next to the encryption icon KB001565 - K2 smartforms 1.0.1 (4.12165.1565.0) Release Notes. Update Options. There is one installer package for K2 smartforms 1.0.6 (4.12165.1625.0) available for download from portal.K2.com that will facilitate upgrades and clean installs. For customers who already have K2 smartforms installed, download the package and install this update This PR contains the following updates: Package Update Change common minor 6.4.6 -> 6.5.0 Release Notes truecharts/apps v6.5.0 Function library for TrueCharts Configuration Schedule: At any time (no schedule defined). Automerge: Disabled by config. Please merge this manually once you are satisfied. ♻ Rebasing: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox.